Once in, you will see the following screen: If you return to the AirPort Utility and return to the Network tab, the following setting will configure the Apple NAT-PMP feature for future autoconfiguration. If you have further difficulties, please send us an email at Step 3b: (optional) Enabling for Apple's NAT-PMP/UPnP service We have not tested this yet, but others have suggested this will work. Once the router comes back, you can check if the camera was set up for external access by turning your phone to your mobile network. Private IP Address: this is the Internal IP address listed in the OWLR App as well.You can find the Public and Private ports in the OWLR app under the Camera Settings -> Network section. Public and Private Ports: this is the port that your camera is on.Description: Personal Web Sharing (VERY IMPORTANT).Then, select the plus symbol (+) underneath the Port Settings, which gives you this screen: Step 4: Set the Port Forwarding on Your Router In the Router Mode dropdown, you want to make sure that DHCP and NAT is selected not Bridge Mode or DHCP Only. Once in, you want to go to the Network tab as shown below: Step 3: Make Sure You Are Using DHCP and NAT on your router If you have the password, you should be able to click the Edit button as shown above. Once you start the AirPort Utility, you will see the following screen: Step 2: Open Your AirPort/Time Capsule/AirPort Extreme PLEASE NOTE - You want to have the newest version of the AirPort Utility (Version 6.3 or higher). You can find it from your Finder and go into Applications -> Utilities -> AirPort Utility ![]() It should NOT be in Bridge mode - it must be in DHCP/NAT mode.įirst and foremost, make sure that the AirPort Utility is available on your Mac and start it. PLEASE NOTE: This requires the newest Airport Utility on your Mac and that your AirPort/Time Capsule/AirPort Extreme is connected to the Internet. Most of these steps were initially gleaned from this Insteon page and then further augmented by our own experiences. But in particular, the Mac ecosystem is quite unique because it supports its own port forwarding process and its own version of UPnP. One of the greater challenges with port forwarding is the vagaries with all different routers.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |